E-Commerce
Corporate

The Floorist Store

  • Free Shipping All Over UAE
  • info@thefloorist.com

The Difference between CLICK and T&G Flooring.
Why More and More People Choose CLICK?

Click Flooring

Refers to the process of flooring, can be completely nail-free, glue-free, keel-free, directly laid on the ground floor.

T&G Flooring

Compared with the traditional flooring, click flooring completely overcome the floor by the external hot and cold, dry and wet changes in the process, resulting in problems such as leaving the seam, warping and drumming, saving the room height, and can be repeatedly disassembled and used, economical and practical!

Here are some advantages of click flooring:

1. More stringent requirements for plywood

In general, the click flooring can withstand 450 kg to 1 ton of tension, so the click flooring has higher requirements on the physical properties of the plywood such as density, expansion and relative humidity, production equipment, processing technology, etc.

2. Better overall laying effect

The click flooring uses advanced equipment in the production process to ensure the accuracy of the click avoid wave height difference.

Industrial standard instead of manual laying standard reduces the error of manual laying. Due to the click force, the click flooring extends to all sides as a whole with the change of temperature, avoiding the local bulge, solving the inherent deformation problem.

3. Glue-free laying

T&G flooring in the laying need to use glue , but most of the glue contains formaldehyde and other chemical ingredients, with more easily caused by indoor pollution, with less and fear of connection is not strong.

4. Reusable

Click flooring is easy to install without glue, easy to disassemble and reusable, especially suitable for temporary places such as exhibitions and shopping malls.

Why do click flooring need to be glued?

The most important purpose of the click flooring installation and glue is to prevent moisture. After the installation of the glue, it will be able to seal the seams, play a preventive role, add a layer of insurance to improve the service life of the floor.

Thanks for your reading!

Any further assistance please be free to ask.

  • +971 4 2276 712
  • info@thefloorist.com

Find out more on LinkedIn

en_USEnglish
arArabic en_USEnglish

How to measure

We know walls come in all shapes and sizes, it’s one of the reasons we love them! For tips on measuring different wall types, scroll through the sketches below.

Standard Wall

If your wall has two slants, simply identify and measure the longest part of the wall in both the width and the height. Again, we will produce your mural as a square or rectangle, with the cutaways taking place during installation.

Sloped Wall

When you have a sloped ceiling or wall, measure the longest and widest parts only, ignoring any slopes. We provide the mural as a whole rectangle or square, and the slope is cut away during installation.

Pitched Wall

When you have a sloped ceiling or wall, measure the longest and widest parts only, ignoring any slopes. We provide the mural as a whole rectangle or square, and the slope is cut away during installation.

Wall with obstacles

When there is a door, window or other obstacle on your wall, only measure the total width and height of the wall, as the obstacle will simply be cut away during hanging. Feel free to send us additional measurements, a photo or a rough plan as we can add the position of the obstacle to your proof image. Easy!

Multiple walls

If you’re looking to wrap a wallpaper around multiple walls, simply combine the widths of each wall and submit one measurement when ordering. There’s no need to order the mural as two separate pieces.